The Sensor
is damped to show a return from 90 deg displacement in approx.
2.5sec.
Sensors
can be supplied without damping at no extra cost however a
longer delivery time can be expected
The
Pin-Out View onthe left is shown
DOWN THROUGH THE SENSOR
Vcc must be controlled 5.00 VDC - spike protected
Current - 19mA
Reversing Vcc polarity may distroy the sensor
Output signal isapprox0.75V above and below the mid
point of 2.4 to 2.6volts. This variation is between different
sensors but should be uniform for both curves on anyonesensor
