© 2002 RobotstoreUK all rights reserved
HOME
ROBOTS - page 5 - Robot Arms

To pages - 1 - 2 - 3 - 4 - 5 - 6
 


INTRODUCTION

ABOUT US
GETTING STARTED
DEFINITIONS + MEANINGS


SHOP HERE

ROBOTS
REMOTE CONTROL+ TELEROBOTICS
CIRCUIT PROTOTYPING
ELECTRONIC COMPONENTS
MICRO-CONTROLLERS
SENSORS + VISION
ACTUATORS
MOTORS
MOTOR CONTROLLERS
POWER + BATTERIES
TEST EQUIPMENT
BOOKS
TOOLS


CONTACT US

CONTACT+ SUPPORT
ORDER + SALES INFO
TERMS+ CONDITIONS
PRIVACY STATEMENT


RESOURCES

LINKS
CURRENCY CONVERTER



 

 


The Elekit Robot Arm

This five-function robot manipulator trainer is the most complex and rewarding kit in the range. Not only is it well made and reasonably powerful, but it is prevented from damaging itself by the use of clutches on each joint and is constructed in Polycarbonate.
In its basic form it is controlled using a hand held console with a three-way switch for each function. It has a soft lining to the gripper jaws which enables it to maintain grip on even smooth, round-section objects.
This arm is a good representation of the many similar full size robots in industrial use and corresponds in many ways to the telerobotic manipulators used on underwater vehicles, in nuclear power plants and on bomb disposal robots.

For more details of the arm and its uses click HERE or on the Photograph
.


As an additional option there is a PC CONTROLLER for the Elekit Robot arm (software for Windows included) which allows various levels of control and programming from your PC serial port.

We consider this arm to be the best all round value for education, hobby and money of any other we have seen.

Elekit Robot arm OUR PRICE: £89.99
PC Controller for Elekit arm OUR PRICE: £44.99



CURRENTLY IN STOCK!!!!

 


The Robotica EduBot 100

Edubot is a five-axis open kinematic robotic arm which connects to the serial port of your computer and is controlled via the Robotica Control Software. It is designed to teach robotics technology in the simplest and most entertaining way. You will learn to build, program and operate a robot step by step with EduBot.
EduBot
is not only a robotic arm which can be used to perform simple pick and place applications; you can also interface EduBot with other devices to complete a sophisticated robotic system. The electronics inside allow you to connect sensors, switches, relays, LEDs etc. to control other devices directly from your computer.
EduBot has a fully modular mechanical design. Two optional body choices in addition to the standard body ensure that the EduBot can be mounted on virtually any surface, as well as being used as a stand-alone robotic arm.
The Robotica Control Software and the electronics are suitable for radio-modem communication, allowing EduBot to be used in wireless mobile robotics applications.

For detailed information click on the picture

OUR PRICE : £1,079.99

NO LONGER AVAILABLE
 


The Robotica EduBot 250


A new version of EduBot with a higher payload and supplied assembled in either black (B) or white (W) finish. The arm is made of acetyl and anti-static PVC. All axes are driven by R/C Servomotors and it is controlled by our R/C Servomotor Controller (optional) and Control Software. Full command protocol is also supplied for the controller to allow you to write your own control program or integrate it with your system. The arm is surface mountable by six screws on the waist flange which makes it particularly suitable for OEM applications

Technical Specification

Degrees of Freedom: 5
End Effecter: Gripper as Standard
Payload: 250 Grams Maximum
Reach: 400mm

For detailed information click on the picture

OUR PRICE : £ 1,849.99

NO LONGER AVAILABLE
 

 
To pages - 1 - 2 - 3 - 4 - 5 - 6
HOME
© 2002 RobotstoreUK all rights reserved
 
Star Book



Modelling and Control of Robot Manipulators