© 2002 RobotstoreUK all rights reserved
HOME
POWER + BATTERIES
Page - 1

To pages - 2 - 3 -
 

INTRODUCTION

ABOUT US
GETTING STARTED
DEFINITIONS + MEANINGS


SHOP HERE

ROBOTS
REMOTE CONTROL+ TELEROBOTICS
CIRCUIT PROTOTYPING
ELECTRONIC COMPONENTS
MICRO-CONTROLLERS
SENSORS + VISION
ACTUATORS
MOTORS
MOTOR CONTROLLERS
POWER + BATTERIES
TEST EQUIPMENT
BOOKS
TOOLS


CONTACT US

CONTACT+ SUPPORT
ORDER + SALES INFO
TERMS+ CONDITIONS
PRIVACY STATEMENT


RESOURCES

LINKS
CURRENCY CONVERTER


PORTABLE 12volt DC POWER PACK

Ideal for both bench top and portable and in Large Mobile Robots
Can power a range of equipment - TV/Video monitors- Motors- TX/RX stations
Air compressors

Specification

Internal Battery 12Vdc, 17.5 Ah Sealed lead acid maintenance free rechargeable battery
Output 1 X 12V car lighter type output socket
1 X 12V + and - heavy duty cables and crocodile clamps
Approx.Dimentions Height - 381mm --- Width - 356mm --- Depth - 133mm
Approx.Weight 8.2 Kg
Operating Temperature 0 deg.C - 40 deg.C ( 32 deg.F - 100 deg.F)
Accessories

a) - 230 VAC~50Hz to 12 VDC 400mA Adaptor/ trickle charger
b) - Car Lighter type plug in-car Charging Cable

Instrumentation a) - Push button operated Battery condition volt meter
b) - Work Lamp

OUR PRICE : £ 39.99

 
 
CONSTANT-VOLTAGE, SEALED LEAD ACID BATTERY CHARGER

Suitable for slow-charging 12V, 2 - 6 Ah sealed lead acid batteries. At the end of the charge, the battery voltage is maintained at a constant level and the charging current decreases to a trickle to keep the battery fully charged. The charger is protected against internal short circuits via a thermal fuse and output short circuits, overloads and incorrect polarity by electronic limitation of output current.

Red LED indicates that charging is in progress: once the charge is complete the LED will turn off.

· Regulated constant voltage
· 230Vac/50Hz input
· Overvoltage protection
· Short circuit protection

Output voltage: 12V
Rated current: 350Ma
Type: Plug-in
Battery capacity: 2 - 6 Ah
Operating temp: -10° to + 25°C
Conformity: Complies with EN60-335-2-29
EMC Standards: Complies with 89/336 EEC
Output plug: red & black fast-on connectors or Cigarette lighter-type plug
Power: 230Vac 50Hz
Dimensions (WxHxD): 62 x 85 x 48mm

OUR PRICE : £17.99
 
AUTOMATIC CONSTANT-VOLTAGE, SEALED LEAD ACID BATTERY CHARGER

Suitable for slow-charging 12V, 1.2- 4.0Ah sealed lead acid batteries. At the end of the charge, the battery voltage is maintained at a constant level and the charging current decreases to a trickle to keep the battery fully charged. The charger is protected against internal short circuits via a thermal fuse and output short circuits, overloads and incorrect polarity by electronic limitation of output current.

· Automatically controlled charging cycle
· Recovers deeply discharged batteries
· Batteries can be left on-charge indefinitely

· Short circuit and overload protection
· Initial surge current limit
· Reverse polarity protected
· Minimum charge time
· Supplied with 1.8m lead with cigarette lighter-type plug
Battery voltage: 12V
Output current: 300mA Type: Plug-in
Battery capacity: 1.2 - 4Ah (suitability)
Input voltage: 230Vac
Indication: Power on
Dimensions (WxHxD): 55 x 60 x 85mm

OUR PRICE : £38.99
 
To pages - 2 - 3 -

HOME

© 2002 RobotstoreUK all rights reserved