This is a truly useful battery charger which gives you control over all aspects of the charging process

The Instructions for use are as follows:-
The Charger will detect the Battery pack Voltage

1) connect the charger to the AC outlet
2) Set the Charging Current (less than 0.2 of battery capacity is recomended)
3) Set the timer ( for guidance - Battery capacity X 1.4 / charging current)
4) Example- a 2.8V - 1500mAh Pack
Charging Current=1500 X 0.2= 300mA
Control Timer = 1500 X 1.4/ 300=7hr
Therefore use the 8hr control timer
5) Connect battery pack to the Charger, red LED lights

6) After the set time the green LED shows- indicating the end of the charging process

The three variations on the charging output plug can be seen in these pictures

Specification

Input - 230V AC 50Hz- 13.5W

Output - 1.4V - 14V DC

Charging Current - 50mA/ 100mA/ 200mA/ 300mA/ 400mA/ 500mA/ 600mA

Charging Time - 0.5hr/ 1hr/ 2hr/ 3hr/ 4hr/ 6hr/ 8hr

For Indoor use only
For rechargable batteries only