|
|
|
|
|
R/C
Servo Controller II
The Robotica
R/C Servo Controller II is a PIC micro controller based multi-purpose
control device ideal for your robotic applications. It connects
to the serial port of your PC and is controlled by the Robotica
Control Software, which is supplied free of charge with
the product.
The Robotica R/C Servo Controller II features eight R/C servo
outputs, two analogue inputs, four digital inputs and three
digital outputs, which allow you to control a wide range of
external devices in your system. The servos can be controlled
by mouse and/or joystick. The controller is fully addressable,
therefore up to four controllers can be controlled from one
serial port.
Besides the standard 9-pin serial cable connection, The R/C
Servo Controller II can also be controlled wire-free up to
100 metres, by upgrading firmware version and using RTCom
® RS232 Radio Modem, both available separately.
|
| |
| OUR
PRICE : £ 84.99 (Complete with control software) |
NO
LONGER AVAILABLE |
| |
|
|
|
| Specification |
| Servo
Channels |
8 |
| Digital
Inputs |
4,
Vinmax = +5.0VDC |
| Analogue
Inputs |
2,
Vinmin = 0VDC , Vinmax = +5.0VDC |
| Digital
Outputs |
3,
Voutmin = 0VDC, Voutmax =+5.0VDC |
| Firmware |
PIC
micro controller;
V1.0 for Wired RS232 Communications (standard)
V2.2 for Radio-Modem RS232 Comms. (optional) |
| Serial
Communication |
via
9-pin RS232 Serial Port |
| Power |
For
Controller Module: 8-24VDC/100mA unregulated.
For R/C Servos: Normally 4.8 6.0VDC
(The power connections of the controller module and
the servo outputs are separated from each other to protect
the controller's operation from the noise generated
by servos.) |
| System
Requirements |
Operating
System: Windows 95, 98, NT4.
Processor: 486/100 or above (Pentium recommended).
Memory: 16MB min, 32MB recommended.
Occupied Disk Space: 2.5MB. |
| Size |
53mm
x 90mm |
| Weight |
35g |
|
|
| |
|
|
|
|
| |
|
|
|
| Software
Features |
- Mouse
and/or joystick control.
- R/C
servomotors can be controlled either manually or through
a program sequence.
- All
the R/C servos are controlled individually. The servos can
be activated both consecutively and simultaneously at ten
different speeds.
- All
analogue/digital input and digital output states can be
observed constantly and controlled by a mouse click on the
screen.
- Different
configuration settings for different applications can be
created for immediate recall, i.e. servo limits, park position,
labels, operational mode, etc.
- The
robot is programmed by the use of easy-to-use and efficient
single-character commands.
- Programming
can be carried out in either Design Mode or Record Mode.
In Record mode, any change you make on the screen controls
is automatically inserted in the text box as program code.
You may also edit and save these entries in Design Mode.
- A comprehensive
Help Menu is incorporated within the software.
|
|
| |
|
HOME
© 2002 RobotstoreUK
all rights reserved
|
|
|
Relevent
Robot
|
Edubot
6 Function Arm
|
|
|
